احصل على حل
AR▼
هذا المنتج متوافق مع المعدات والتطبيقات الخاصة بالعلامات التجارية التالية أو مناسب لها، وذلك للاسترشاد به عند الاختيار فقط. تعود العلامات التجارية إلى أصحابها كل على حدة، ولا تمثل أي شراكة أو تأييد.
The Jyntrel pet water dispenser filter cartridge is a multi-layer replacement filter for cat and dog automatic water fountains and smart circulating water dispensers. It combines high-density PET non-woven fabric, ion exchange resin and coconut shell activated carbon to capture hair and floating particles, reduce residual chlorine and odours, and soften hard water. It is designed for pet product brands, OEM/ODM buyers and distributors who need a reliable, food-safe filter for animal drinking water systems.
In a pet water dispenser, the filter sits in the water circulation loop rather than in an air duct. Water is drawn from the reservoir by a small pump, passes through the filter cartridge and returns to the drinking bowl. The operating conditions that matter are water flow rate, daily volume, water hardness and the amount of hair and debris carried into the bowl. Typical fountains move 500–1000 ml per day through the cartridge, and the flow is continuous but low velocity. The filter must work without imposing excessive resistance on the pump, so the media are arranged in layers that balance contact time with pressure drop. The outer PET non-woven layer intercepts hair and visible particles before they reach the carbon and resin, protecting the inner media and maintaining flow. The ion exchange resin then reduces water hardness, and the coconut shell activated carbon adsorbs residual chlorine, odours and organic compounds. This order keeps the cartridge effective across the 2–4 week replacement interval and helps maintain a steady flow even as captured debris accumulates.
The Jyntrel cartridge is built around three functional layers. The high-density PET non-woven fabric captures hair, dust and suspended solids, which are common in multi-pet households. The ion exchange resin softens water by reducing calcium and magnesium hardness, which helps limit scale on fountain parts. The coconut shell activated carbon provides chlorine removal of more than 95% and reduces unpleasant tastes and odours, supporting water acceptance by cats and dogs. All materials are food-grade and produced under ISO 9001, ISO 14001 and IATF 16949 systems. The cartridge is intended for replacement every 2–4 weeks, depending on local water quality and how often pets drink. These performance points are verified through in-house testing at a CNAS-accredited laboratory, and results can be provided with samples or bulk orders for technical evaluation.
Because pet water dispensers vary widely in bowl geometry, pump flow and filter housing, we ask for a short set of data before quoting. Please share the dispenser or fountain model, the current filter dimensions or a drawing, the expected water flow or daily volume, the water hardness and chlorine level if known, and your target order quantity. With these inputs, our engineering team can recommend a standard cartridge or develop an OEM/ODM version with adjusted dimensions, media ratio or housing fit. We support custom sizes, filter material blends, logo printing and packaging design. Our team has developed more than 1,000 filtration solutions and can work from your drawings or samples. Custom samples typically take 15–25 days, and standard samples can be sent within 3–5 working days.
| Item | Detail |
|---|---|
| Product name | Pet water dispenser filter cartridge / smart circulating water dispenser filter |
| Core materials | High-density PET non-woven fabric + high-efficiency ion exchange resin + premium coconut shell activated carbon |
| Core functions | Removes floating matter and impurities, strongly adsorbs residual chlorine and odours, softens water (reduces hardness) |
| Applications | Automatic cat and dog water dispensers, smart constant-temperature pet water fountains, pet water purification equipment |
| Recommended replacement interval | 2–4 weeks (depending on local water quality and pet drinking frequency) |
| Safety and quality | Produced under ISO 9001/14001 and IATF 16949 systems; materials meet US EPA and NSF standards for food-grade safety |
| Customisation (OEM/ODM) | Supported by a 20,000 m² clean workshop and CNAS-level laboratory; custom shapes, sizes and filter material ratios available |
The Jyntrel pet water dispenser filter cartridge is used in automatic water fountains for cats and dogs, smart constant-temperature circulating water dispensers and other pet water purification equipment. It suits multi-pet households where hair and debris load is high, and areas with hard water where scale control is important. Pet product brands can specify the cartridge as a replacement consumable for their own fountain models, and distributors can stock it as a service part. The filter is also used in OEM/ODM programmes where a customer requires a specific fit or media blend for a new fountain design.
Jyntrel operates a 50,000 m² production site in Zhongshan, Guangdong, China, including six clean workshops totalling 20,000 m². Multiple automated production lines support a monthly capacity of millions of pieces, which helps maintain supply stability for seasonal and repeat orders. Our in-house laboratory is CNAS-accredited and can issue test reports for filtration efficiency, dust holding capacity and resistance. We have held ISO 9001, ISO 14001 and ISO 45001 certification, and we achieved IATF 16949 certification in 2024. Quality control follows IQC, IPQC and OQC throughout production. With more than 20 years of filtration manufacturing and export experience to Europe, the United States, Japan and South Korea, we can support compliance documentation for REACH and RoHS where required.
To receive a tailored recommendation and quotation, please send us your device or vehicle model, filter size or drawing, required airflow or water flow, operating conditions such as water hardness and temperature, and estimated order quantity. Our team will respond with a suitable cartridge specification, sample options and lead time. Contact Jyntrel to discuss your pet water dispenser filter requirements.
We need the expected water flow rate and daily volume through the cartridge, typically 500–1000 ml per day for most fountains. Please also share the pump specification if available. With these figures we can recommend a media configuration that maintains flow without excessive resistance.
The cartridge is designed for the low-velocity circulation loops found in pet water dispensers, not for high-velocity systems. The layered PET non-woven, ion exchange resin and coconut shell carbon are arranged to balance contact time and pressure drop. If your fountain has an unusually high flow rate, share the data and we can adjust the media ratio.
The coconut shell activated carbon provides chlorine removal of more than 95% under normal operating conditions. The recommended replacement interval is 2–4 weeks, depending on local water quality and how often pets drink. These performance points are verified by our CNAS-accredited laboratory.
Yes. We support OEM/ODM customisation of dimensions, shape, filter material ratio and housing fit based on your drawing or sample. Logo printing and packaging design are also available. Custom samples typically take 15–25 days.
Standard models typically have an MOQ of 3,000–5,000 pieces, with lead times of about 7–15 days for stock items. Custom models generally require 5,000–10,000 pieces and 30–45 days, depending on complexity. Our automated lines support monthly capacity in the millions of pieces.
Yes, we encourage sample testing. Standard samples can be sent within 3–5 working days, and custom samples take about 15–25 days. We can include CNAS test reports and material safety documentation with the sample for your evaluation.
In multi-pet households with higher drinking frequency and more hair load, replace the cartridge every 2–3 weeks. In single-pet homes with good water quality, 3–4 weeks may be sufficient. Monitor flow and water clarity as practical indicators.
Water hardness, residual chlorine level, amount of hair and debris, and daily volume all affect filter life. High hardness or heavy debris can shorten the 2–4 week interval. Share your water quality data and we can advise on a suitable replacement schedule.