Solicitar propuesta
ES-ES▼
Este producto es compatible con los equipos y aplicaciones de las siguientes marcas, o apto para ellos, solo como referencia para la selección. Las marcas comerciales pertenecen a sus respectivos propietarios; no implican afiliación ni respaldo.
The Jyntrel anti-mite HEPA filter is a multi-layer composite panel filter that removes fine particulate and suppresses dust-mite and microbial load in the airstream. It filters PM2.5, pollen, pet dander, cigarette particles and microbial aerosols, and is rated at up to 82.4% dust-mite removal according to the FZ/T01100-2008 reference method. It is built for air purifier, fresh-air air-conditioning and vehicle cabin purification platforms, and for appliance makers and filter distributors who need a defined efficiency grade inside a fixed housing.
Start with the path, not the part. The filter sits downstream of the pre-filter and upstream of the fan or heat exchanger, and its behaviour is set by face velocity, dust loading and moisture in that position. At low face velocity the media does the work and pressure drop stays modest; as velocity rises, resistance climbs faster than efficiency gains, so the fan curve and the filter grade have to be read together.
Humidity matters as much as velocity. In a bedroom or a coastal fresh-air unit, the filter sees long wet-hours and intermittent dry cycles; a composite construction that holds its pleat shape under that cycle keeps the pleat spacing open and the airflow even across the face. In vehicle cabin units, the filter also meets vibration and short, high-flow bursts at maximum blower speed. Tell us which of these describes your unit and we will match media, pleat count and frame to it.
Dust-mite and microbial performance is a surface and dwell question. The treated layer needs contact time with the air passing through it, so a pleat pack that is too shallow for the airflow will pass allergens through before the coating can act. Sizing the pleat depth against the actual flow is part of the selection work, not an afterthought.
The core is a high-efficiency dust-collection HEPA layer. It is the stage that captures suspended particulate, and it is the stage that sets the initial and final pressure drop of the assembly. Around it, the composite adds an anti-viral and anti-bacterial function that acts on influenza A virus, E. coli and Staphylococcus aureus, and an anti-mite function measured at up to 82.4% removal under the FZ/T01100-2008 reference standard, certified by a national testing body.
This combination suits interiors where occupants spend long hours: bedrooms, classrooms, offices and vehicle cabins. It does not replace source control, and it does not remove gases; where odour or VOC control is required, a carbon stage can be added to the composite and the pressure budget recalculated.
Structure is flexible: panel, cylindrical and V-bank pleated formats are all available, so the same media family can serve a flat slide-in air purifier slot and a high-flow V-bank fresh-air unit. Efficiency grade, media weight and pleat count are selected per project rather than fixed by catalogue.
OEM and ODM customisation is offered across length, width, thickness, outline shape and efficiency combination. To quote accurately we ask for six things: the device or vehicle model; the size or a drawing of the housing and seal line; the rated airflow and face velocity; the operating conditions (temperature, humidity, dust load, indoor or cabin); the target efficiency grade; and the order quantity. With those, we can propose a pleat geometry and media combination and return a pressure-drop estimate for your fan curve.
We have developed more than 1,000 filter solutions across projects, which shortens the path from drawing to sample for common appliance platforms. Where a housing is new, we work from your CAD data and confirm the fit on a physical sample before tooling.
| Item | Detail |
|---|---|
| Product name | HEPA + anti-mite composite filter (anti-mite and anti-bacterial HEPA filter) |
| Construction and form | Multi-layer functional composite; panel, cylindrical and V-bank pleated structures supported |
| Core dust performance | Filtration of PM2.5, pollen, pet dander, cigarette particles and microbial aerosols |
| Anti-bacterial / anti-viral function | Inhibits and kills influenza A virus, E. coli, Staphylococcus aureus and similar pathogens |
| Anti-mite performance (test standard) | Up to 82.4% dust-mite removal, referencing FZ/T01100-2008, certified by a national testing body |
| Main end applications | Household air purifiers, vehicle air purifiers, fresh-air air conditioners, mite-removal vacuum cleaners, mother-and-baby health appliances |
| Size and specification customisation | OEM/ODM supported: length, width, thickness, outline and efficiency combination to order |
| Quality system | Produced using a 20,000 m² cleanroom area; IATF 16949 and ISO 9001 certified; national CNAS testing centre for consistency |
Each application has its own duty point. A vacuum cleaner exhaust sees short, high-velocity pulses; a fresh-air unit sees continuous outdoor dust. We tune pleat depth and media grade to the duty rather than shipping one build to all of them.
Jyntrel operates from Zhongshan, Guangdong, China, with a plant of 50,000 m², of which 6 cleanrooms total 20,000 m². Multiple automated production lines give a monthly capacity of millions of pieces, which supports both launch volumes and replenishment orders. More than 20 years of continuous export to Europe, the United States, Japan and Korea underpins supply stability for long-life programmes.
Quality control runs through IQC, IPQC and OQC. Our in-house laboratory holds CNAS accreditation and issues reports on filtration efficiency, dust holding capacity and resistance; every batch can ship with a COA for incoming verification. The company holds IATF 16949 (achieved in 2024), ISO 9001, ISO 14001 and ISO 45001, and products meet REACH and RoHS requirements with compliance documents available.
Send the device or vehicle model, the size or drawing, the airflow or face velocity, the operating conditions, the target efficiency grade and the quantity. Our engineering team will propose a structure and media combination and confirm it with a sample. Contact us to start the selection.
It can, but the pleat geometry must be matched to the face velocity. At higher velocity, resistance rises faster than efficiency, so we select pleat depth and media grade against your fan curve. Share the rated airflow and we will confirm the build.
We need the rated airflow, the face velocity at the filter plane, and the available pressure budget. The housing size or drawing and the target efficiency grade complete the picture. With these, we can estimate initial and final pressure drop for your unit.
The filter is rated at up to 82.4% dust-mite removal, referencing the FZ/T01100-2008 standard and certified by a national testing body. It also targets PM2.5, pollen, pet dander and microbial aerosols. Actual in-unit performance depends on airflow and housing fit.
Yes. OEM and ODM customisation covers length, width, thickness, outline shape and efficiency combination, in panel, cylindrical and V-bank pleated formats. We work from your drawing or CAD data and confirm fit on a physical sample. More than 1,000 filter solutions have been developed across projects.
Yes. Send the model, drawing, airflow and operating conditions, and we will confirm a sample build and schedule. Sample lead time and any sample charge are confirmed with the quotation based on the specification. Approval on the sample then leads to the production order.
Minimum order quantity depends on size, structure and packaging, and is confirmed at quotation. Lead time is also set per project once the specification and quantity are fixed. Our automated lines and monthly capacity of millions of pieces support both launch and replenishment volumes.
Replacement interval depends on dust load and running hours, not on a fixed calendar. In normal household use, check the filter when airflow drops or the unit signals a change. Confirm the interval with your own dust-load testing; we can supply resistance and dust holding data to support it.
Tell us temperature, humidity, indoor or cabin use, dust level and whether the unit runs continuously or intermittently. These determine media choice and pleat depth. <a href="/en/contact">Contact us</a> with these details and we will propose a build.