Uzyskaj rozwiązanie
PL-PL▼
Ten produkt jest kompatybilny z urządzeniami i zastosowaniami następujących marek lub do nich odpowiedni, wyłącznie jako pomoc przy wyborze. Znaki towarowe należą do ich odpowiednich właścicieli; nie oznaczają partnerstwa ani aprobaty.
The Jyntrel flat antibacterial HEPA filter is a composite panel filter that combines high-efficiency particulate filtration with an antibacterial and antiviral layer. It captures PM2.5, pollen, pet dander, cigarette smoke particles and microbial aerosol, while the treated layer helps inactivate influenza A virus, E. coli and Staphylococcus aureus. It is designed for air purifiers, vehicle cabin purifiers, fresh-air air-conditioning systems and medical disinfection equipment, and is available in custom sizes and efficiency grades for OEM and ODM programmes.
In a typical installation the filter sits as the final stage of a purifier or fresh-air unit, after any pre-filter or coarse dust stage. Air enters the pleated high-density medium across the full face area, passes through the antibacterial layer, and exits to the room or duct. Because the panel is flat and thin, face velocity and the available pressure budget are the two variables that most affect behaviour: higher airflow raises the pressure drop across the pleat pack, and the fan curve of the host unit determines whether that is acceptable. Jyntrel selects medium grade and pleat geometry against the airflow and resistance target you specify, so the filter works within the system rather than against it.
Environment also matters. The antibacterial treatment is intended for spaces where microbial control is a priority, such as homes with allergy-sensitive occupants, maternal and infant appliances, offices and medical rooms. In ducted fresh-air systems, the filter should be protected from rain ingress and coarse debris upstream to preserve capacity between change-outs.
The filter is built around a multi-layer functional composite with a flat, high-density pleated structure. Its core HEPA performance targets PM2.5, pollen, pet dander, cigarette particles and microbial dust aerosol. The antibacterial and antiviral function is designed to kill and inhibit influenza A virus, E. coli and Staphylococcus aureus at the source. For house-dust mite control, the filter achieves a mite removal rate of up to 82.4%, tested with reference to the FZ/T 01100-2008 standard by a national authoritative body.
These functions are delivered in a slim panel format, which allows the filter to fit multiple appliance models without changing the housing. Efficiency grade, pleat count and layer combination are set per project, so the same panel platform can serve a low-resistance purifier and a higher-efficiency medical enclosure.
Jyntrel supports full OEM/ODM customisation of length, width, thickness and filtration efficiency, including tooling and contract manufacturing for new formats. To propose the right build, our engineers need the device or vehicle model, the available filter slot dimensions or a drawing, the rated airflow or water flow of the system, and the operating conditions such as ambient temperature, humidity, dust loading and target pressure drop. Quantity and packaging requirements complete the picture. With these inputs we can match medium grade, pleat geometry and frame format, and provide samples for fit and performance validation before mass production.
| Item | Detail |
|---|---|
| Product name | Flat HEPA + antibacterial/antiviral composite filter (Flat Anti-bacterial HEPA Filter) |
| Construction and form | Multi-layer functional composite filter / flat high-density pleated structure |
| Core HEPA performance | Strong filtration of PM2.5, pollen, pet dander, cigarette particles and microbial dust aerosol |
| Antibacterial / antiviral function | Effectively kills and inhibits influenza A virus, E. coli and Staphylococcus aureus |
| Mite removal efficiency (test standard) | Mite removal rate up to 82.4% (with reference to FZ/T 01100-2008, tested and certified by a national authoritative body) |
| Main end applications | Household air purifiers, vehicle purifiers, fresh-air air-conditioning systems, medical disinfection equipment, maternal and infant health appliances |
| Size and specification customisation | 100% OEM/ODM flexible customisation; tooling and contract manufacturing for different length, width, thickness and filtration efficiency combinations |
| Quality certification | Produced in a 20,000 m² clean workshop; IATF 16949 and ISO 9001 certified for automotive-grade product consistency |
The panel is used in household air purifiers, vehicle purifiers, fresh-air air-conditioning systems, medical disinfection equipment and maternal and infant health appliances. In each case the selection logic is the same: match the filter face area and efficiency grade to the airflow and resistance the unit can tolerate, then confirm fit in the housing. The antibacterial layer adds value where occupants are sensitive to microbial exposure or where the appliance runs for long periods between service intervals.
Jyntrel has more than 20 years of filter research and manufacturing experience and has exported to Europe, the United States, Japan and Korea for over 20 years, which supports stable supply for long-running programmes. Multiple automated production lines give a monthly capacity of millions of pieces, and more than 1,000 filter solutions have been developed to date.
The plant covers 50,000 m², including six clean workshops totalling 20,000 m². An in-house CNAS-accredited laboratory issues reports on filtration efficiency, dust holding capacity and resistance. The company holds IATF 16949 (obtained in 2024), ISO 9001, ISO 14001 and ISO 45001 certifications, and products meet REACH and RoHS requirements with compliance documents available. IQC, IPQC and OQC controls run through the whole process. The company is based in Zhongshan, Guangdong, China.
To receive a tailored proposal, send us your device or vehicle model, the filter size or a drawing, the system airflow or water flow, the operating conditions, and the quantity you expect. Our team will respond with a recommended configuration and sample plan. Contact Jyntrel to start the conversation.
The flat pleated structure is selected against the airflow and resistance target of your unit, so it can be configured for higher face velocities by adjusting pleat geometry and medium grade. Share the rated airflow and acceptable pressure drop and Jyntrel will propose a matching build.
We need the rated airflow of the system, the acceptable initial and final pressure drop, the filter slot dimensions or a drawing, and the operating conditions such as temperature, humidity and dust loading. Quantity and packaging requirements help us finalise the quote.
Efficiency grade is set per project within the HEPA range, and the filter targets PM2.5, pollen, pet dander, cigarette particles and microbial aerosol. The antibacterial layer is designed to kill and inhibit influenza A virus, E. coli and Staphylococcus aureus, with mite removal up to 82.4% tested with reference to FZ/T 01100-2008.
Yes. Jyntrel supports 100% OEM/ODM customisation of length, width, thickness and filtration efficiency, including tooling and contract manufacturing. More than 1,000 filter solutions have been developed, so a new format can be matched to your housing.
Send your device or vehicle model, size or drawing, airflow, operating conditions and quantity, and our team will recommend a configuration and provide a quotation. Samples are then prepared for fit and performance validation before mass production.
MOQ depends on the specification and tooling requirements of your project. Provide your target size, efficiency grade and annual volume, and Jyntrel will confirm the minimum order quantity for that configuration.
Lead time depends on whether the format is standard or newly tooled, and on order volume. With multiple automated lines and a monthly capacity of millions of pieces, Jyntrel schedules production after sample approval and confirms the delivery date in the quotation.
Replacement depends on dust loading and running hours in your system; monitor pressure drop and follow the appliance manufacturer's service interval. Once resistance rises beyond the fan's acceptable limit, the panel should be changed to protect airflow and efficiency. Contact Jyntrel to discuss a replacement schedule for your operating conditions.