Uzyskaj rozwiązanie
PL-PL▼
Ten produkt jest kompatybilny z urządzeniami i zastosowaniami następujących marek lub do nich odpowiedni, wyłącznie jako pomoc przy wyborze. Znaki towarowe należą do ich odpowiednich właścicieli; nie oznaczają partnerstwa ani aprobaty.
This Jyntrel coffee machine filter cartridge is a drop-in water purification solution compatible with CAPRESSO coffee machines. It combines high-quality coconut shell activated carbon with food-grade ion exchange resin to reduce chlorine, odours, heavy metals, and scale from the water supply. It is designed for owners and operators of automatic, semi-automatic, and commercial coffee machines who need reliable protection for the heating system and consistent coffee flavour.
In a coffee machine water circuit, the filter sits on the cold-water inlet line, upstream of the pump, boiler, and brewing group. Water enters the cartridge at the supply pressure and passes through the filtration media before reaching the machine. The operating pressure range is 20–120 psi (approximately 1.4–8.3 bar), and the allowed water temperature is 2°C to 38°C. Filtration is for cold water only; hot water or steam must not be routed through the cartridge.
Flow behaviour depends on the pressure and the condition of the media. At the lower end of the pressure range, expect a reduced flow rate; at higher pressures, flow increases but should remain within the machine manufacturer's inlet specification. The cartridge's fine pore structure intercepts sand, rust, and other large particles before they can reach sensitive components. For systems with high or variable inlet pressure, a pressure regulator upstream of the filter is recommended to keep the cartridge within its rated range.
Because the filter is typically installed in the machine's water supply line, the surrounding environment should be dry and protected from freezing. Ambient temperature around the installation should remain within the water temperature limits to avoid damage to the cartridge or housing. The cartridge is not designed for outdoor exposure or for use with water that is microbiologically unsafe without adequate disinfection before or after the filter.
The filtration media is selected for two primary duties: adsorption and scale control. Coconut shell activated carbon provides a high surface area for removing residual chlorine, organic odours, and taste-impairing compounds. Food-grade ion exchange resin reduces calcium and magnesium ions, the minerals that form limescale in boilers and heating elements. By limiting scale build-up, the cartridge helps maintain heat transfer efficiency and can extend the service life of the machine.
The micron rating is described as fine pore interception, effectively capturing sediment, rust, and larger particulate matter. This protects the pump and solenoid valves from abrasion and clogging. The cartridge does not add chemicals to the water and is made from materials suitable for food-contact applications. For precise removal rates, refer to the test data available from Jyntrel's CNAS-accredited laboratory; performance varies with local water quality and flow rate.
Filter life is approximately 250 litres or 2–3 months, whichever comes first, depending on local water hardness and usage frequency. In hard-water areas or high-volume commercial settings, replacement may be needed more frequently. A consistent replacement schedule is important because exhausted ion exchange resin can release previously captured hardness ions, and saturated carbon stops removing chlorine.
To recommend the correct cartridge or to develop a custom version, Jyntrel needs specific information about your machine and water conditions. Please provide the following:
With this data, our engineering team can confirm compatibility, propose the appropriate media grade, and provide a quotation. For OEM/ODM projects, we also customise housing colour, logo, packaging, and labelling. Custom formulations and private-label packaging are available; sample lead time is typically 2–3 weeks after technical details are confirmed.
| Item | Detail |
|---|---|
| Filtration Media | High-quality coconut shell activated carbon + food-grade ion exchange resin |
| Micron Rating | Fine pore interception; effectively captures sand, rust, and other large particles |
| Filter Life | Approximately 250 litres or 2–3 months (depending on local water quality and usage frequency) |
| Operating Pressure | 20–120 psi (approximately 1.4–8.3 bar) |
| Operating Temperature | 2°C–38°C (cold water filtration only) |
| Applications | Automatic coffee machines, semi-automatic espresso machines, commercial coffee machine water softening, OEM water filter cartridge customisation |
| Quality Certification | Production follows ISO 9001/14001, IATF 16949, medical supplies GMP standard, CNAS national-level testing certification |
This cartridge is used in automatic coffee machines, semi-automatic espresso machines, and commercial coffee machine water softening systems. In office coffee service, cafés, and hospitality settings, it protects boilers and brewing equipment from scale and sediment, supporting consistent extraction and reducing maintenance downtime. It is also suitable as an OEM water filter cartridge for appliance brands and distributors that require private-label filtration solutions.
The cartridge is compatible with CAPRESSO machines as a replacement filter. It is not an original CAPRESSO product; CAPRESSO is a trademark of its respective owner and is referenced only to indicate compatibility.
Jyntrel brings over 20 years of filtration product development and manufacturing experience, with continuous exports to Europe, the United States, Japan, and South Korea for more than two decades. This export history supports stable supply and familiarity with international compliance requirements.
The production base covers 50,000 square metres in Zhongshan, Guangdong, China, including six cleanrooms totalling 20,000 square metres. Multiple automated production lines support a monthly capacity of millions of pieces, allowing us to handle large and repeat orders. Our quality management follows IQC, IPQC, and OQC processes, and the in-house laboratory is CNAS-accredited for tests such as filtration efficiency, dust holding capacity, and resistance. The company holds ISO 9001, ISO 14001, and ISO 45001 certifications, and has been certified to IATF 16949 since 2024. Products comply with REACH and RoHS environmental regulations, and compliance documentation is available upon request.
For OEM/ODM projects, we support customisation of dimensions, structure, filter media grade, housing material, logo, and packaging. To date, we have developed more than 1,000 filtration solutions.
To receive a tailored recommendation and quotation, please send us your device or vehicle model, required size or drawing, water flow rate and pressure, operating conditions (temperature, water hardness, daily volume), and estimated quantity. Our team will respond with a solution that fits your system. Contact Jyntrel to start the conversation.
This filter is designed for water filtration in coffee machines, not for air or high-velocity airflow. Its operating limits are 20–120 psi water pressure and 2°C–38°C water temperature. For air filtration products, please contact Jyntrel separately.
For this water filter, we need the water flow rate (L/min) and supply pressure (psi or bar) rather than airflow data. Please also provide the coffee machine model, filter dimensions or drawing, and daily water volume. With these details, we can confirm the suitable cartridge and provide a quotation.
The cartridge uses coconut shell activated carbon and ion exchange resin to reduce chlorine, odours, heavy metals, and scale. Specific removal rates depend on water quality and flow rate; test data from our CNAS-accredited laboratory can be provided on request. For critical applications, we recommend water testing to confirm suitability.
Yes. We offer OEM/ODM customisation of dimensions, structure, filter media grade, housing material, logo, and packaging. Please provide your machine model, size or drawing, flow and pressure requirements, and target quantity. Our engineering team will evaluate feasibility and propose a solution.
To receive a sample and quotation, please share your device model, required size or drawing, water flow and pressure, operating conditions, and estimated quantity via our contact page. We will confirm sample availability and lead time, typically 2–3 weeks for customised samples, and provide pricing based on your requirements.
The MOQ for standard compatible models is 5,000 pieces, with a lead time of 15–20 days for stock or small batch orders. For OEM customised versions, the recommended MOQ is 10,000 pieces, and production lead time is approximately 25–30 days after design and packaging confirmation. Monthly capacity of millions of pieces supports large repeat orders.
Replace the cartridge every 2–3 months or after 250 litres of water, whichever comes first. In hard-water areas or high-usage commercial settings, more frequent replacement may be necessary. Regular replacement ensures continued protection against scale and chlorine.
Yes, in addition to CAPRESSO-compatible models, we can supply replacement filters for other major coffee machine brands. If you have a specific model or want to develop a new filter, please provide a sample or drawing for evaluation. Contact us to discuss your requirements.