Få en lösning
SV-SE▼
Denna produkt är kompatibel med eller lämplig för utrustning och applikationer från följande varumärken, endast som urvalsreferens. Varumärkena tillhör respektive ägare och innebär inte partnerskap eller rekommendation.
The Jyntrel washable vacuum cleaner filter (disc shape) is a replacement filter for handheld vacuums, robot vacuums and spot cleaners, designed to capture PM2.5, fine dust, dust mites, pollen and pet dander before air returns to the room. Its PTFE microporous membrane and composite PP media maintain low airflow resistance so motor suction is not sacrificed. It suits OEM and ODM programmes that need stable, washable filtration across high-dust, high-velocity operating conditions.
In a vacuum cleaner the filter is the last barrier before exhaust air re‑enters the room. The disc sits in the post‑motor or pre‑motor air path, where face velocity can rise sharply during peak suction and dust loading increases within seconds of pickup. Jyntrel specifies the media and pleat or disc geometry around that duty: high porosity for low pressure drop, a stable pore structure to hold captured particles under pulsating airflow, and a rigid frame that keeps the filter seated as the motor ramps.
The washable format changes the maintenance profile. Instead of a disposable cartridge that loads and restricts airflow, the PTFE surface releases most captured dust during rinsing, so the filter returns close to its clean pressure drop. This matters in handheld vacuums with short runtimes and in robot vacuums where airflow is limited by a small fan. The result is a filter that behaves predictably across the cleaning cycle, from first use to the thirtieth wash.
Jyntrel builds this filter around three performance requirements: HEPA‑grade microparticle interception, low airflow resistance, and washability. The PTFE membrane captures fine particulate at the surface, which prevents deep media loading and supports repeat washing. Composite PP media and optional antibacterial treatment extend protection where dust and allergens are a concern. The low‑resistance design keeps motor suction strong and helps prevent overheating and runtime loss, while the moulded frame and optional rubber gasket maintain a tight seal so air passes through the media rather than around it.
Filtration efficiency and pressure drop are verified in Jyntrel’s CNAS‑accredited laboratory, and reports can be issued with samples. The filter is available in cylindrical, flat and special‑shaped formats to match the host appliance’s internal geometry.
Because the disc filter is a fit‑critical component, selection starts with the appliance, not the filter. To propose the right specification, Jyntrel needs the device or vehicle model, a drawing or sample with dimensions (diameter, thickness, centre hole), the airflow or water flow of the system, and the operating conditions: dust type, temperature, humidity and expected wash frequency. Quantity and packaging requirements complete the brief.
Customisation covers 100% structural and dimensional OEM work: eco‑friendly injection‑moulded frames in cylindrical, flat or irregular shapes, rubber sealing rings, media grade from coarse to HEPA, logo and retail packaging. With more than 1,000 filtration solutions developed, Jyntrel can match an existing appliance or create a new disc format from a drawing.
| Item | Detail |
|---|---|
| Product name | Vacuum cleaner filter cartridge / robot vacuum filter (disc shape) |
| Core filtration media | High‑precision PTFE (polytetrafluoroethylene) microporous membrane / composite PP (polypropylene melt‑blown) / antibacterial treated filter paper |
| Core purification function | Captures PM2.5, fine dust, dust mites, pollen and pet dander from the dust cup; prevents secondary exhaust pollution |
| Physical fluid characteristics | High‑porosity breathable design with very low operating airflow resistance; preserves motor suction, helps prevent motor overheating and extends runtime |
| Main end applications | Handheld cordless vacuums, smart robot vacuums, mite removers, wet‑dry vacuums, compact car vacuum devices |
| Frame and dimensional customisation | 100% flexible OEM production to device dimensions. Eco‑friendly injection‑moulded frames (cylindrical, flat, special shapes) and rubber sealing ring edging for 100% air tightness. |
| Company certification system | 50,000 m² modern production base and CNAS‑accredited testing centre. ISO 9001, ISO 14001 and IATF 16949 quality management systems. |
The disc filter is used in handheld cordless vacuums, smart robot vacuums, mite removers, wet‑dry vacuums and compact car vacuum devices. In each case the operating condition defines the specification: a robot vacuum needs a low‑profile disc with low pressure drop to protect runtime; a handheld vacuum needs a robust washable surface for frequent cleaning; a mite remover benefits from antibacterial media and tight sealing. Jyntrel supplies the same platform across these appliances with media grade and frame geometry adjusted to the host system.
Jyntrel operates multiple automated production lines with monthly capacity in the millions of pieces, supported by a 50,000 m² plant in Zhongshan, Guangdong, China, including six clean workshops totalling 20,000 m². More than 20 years of export experience to Europe, the US, Japan and Korea provides supply stability for long‑run programmes.
Quality control follows IQC, IPQC and OQC stages, and the in‑house CNAS‑accredited laboratory issues filtration efficiency, dust holding capacity and pressure drop reports. The company holds ISO 9001, ISO 14001 and ISO 45001 certifications, and achieved IATF 16949 automotive quality management certification in 2024. Products comply with REACH and RoHS environmental regulations, with compliance documents available on request. With over 1,000 filtration solutions developed, Jyntrel supports OEM/ODM customisation of size, structure, media grade, frame material, logo and packaging.
To receive a specification and quote, please send the device or vehicle model, the filter size or a drawing, the system airflow or water flow, the operating conditions (dust type, temperature, humidity, wash frequency) and your required quantity. Jyntrel will respond with a proposed media grade, frame design and sample plan. Contact our filtration team to start the review.
Yes. The high‑porosity PTFE and composite PP media are selected for low airflow resistance, so pressure drop stays controlled as face velocity rises during peak suction. The moulded frame and optional rubber gasket maintain a tight seal so air passes through the filter rather than bypassing it.
We need the system airflow or water flow of the host appliance, together with the device or vehicle model and the filter dimensions or a drawing. Dust type, temperature, humidity and expected wash frequency help us select the media grade and frame design.
The filter is built for HEPA‑grade microparticle interception and captures PM2.5, fine dust, dust mites, pollen and pet dander. Efficiency and pressure drop are verified in Jyntrel’s CNAS‑accredited laboratory, and reports can be issued with samples.
Yes. We provide 100% structural and dimensional OEM customisation, including cylindrical, flat and special‑shaped frames, rubber sealing rings, media grade and logo or packaging. Send a drawing or sample and we will match the existing appliance or develop a new format.
Samples of standard specifications are available for testing, and custom samples can be produced from your drawing or sample. Each sample can be supplied with a CNAS laboratory report. Contact us with your operating conditions and quantity for a formal quote.
MOQ and lead time depend on the specification, media grade and frame customisation. Please share your device model, dimensions, airflow data and required quantity so we can confirm the minimum order and production schedule.
The washable PTFE surface is designed for repeat rinsing, and replacement intervals depend on dust load and wash frequency. Under normal use, washing restores most of the clean pressure drop; we recommend monitoring suction performance and replacing when airflow no longer recovers after cleaning.
Yes. The same disc platform is supplied across handheld cordless vacuums, robot vacuums, mite removers, wet‑dry vacuums and compact car vacuums, with media grade and frame geometry adjusted to each host system. Share your model list and we will propose specifications for each.