Teklif Alın
TR-TR▼
Bu ürün, aşağıdaki markaların ekipman ve uygulamalarıyla uyumludur veya bunlara uygundur; yalnızca seçim referansı içindir. Ticari markalar ilgili sahiplerine aittir; ortaklık veya onay anlamına gelmez.
The Jyntrel disc-shaped water dispenser filter is a round, drop-in cartridge for pet water fountains and smart circulating dispensers. It combines high-density PET non-woven fabric, ion-exchange resin and coconut-shell activated carbon to trap hair and floating particles, reduce residual chlorine and odour, and soften water by lowering hardness and TDS. It is made for pet fountain brands, OEM/ODM buyers and distributors who need a stable, food-contact-safe filter in volume.
This is a water filter rather than an air filter, so the working path is hydraulic. Water leaves the pump, passes through the disc from its outer face inward, and returns to the drinking trough. Flow rate, daily on/off cycles and the pump's head pressure decide how long the medium stays in contact with the resin and carbon; lower flow gives longer contact and better TDS reduction, while higher flow favours particle capture.
Typical fountain pumps move a small volume at low head, and the disc is sized to sit in that loop without adding noticeable restriction. Water temperature is normally ambient, and the filter is designed for continuous wet service. Hair, dust and food crumbs load the outer non-woven layer first, so the surface area facing the trough matters as much as the medium inside.
Water chemistry drives behaviour more than any other variable. Hard water consumes ion-exchange capacity faster, and high organic load shortens carbon life. In soft water with one or two pets, the cartridge holds its performance longer; in hard water or multi-pet households, it should be changed sooner.
The outer high-density PET non-woven layer intercepts hair, fine dust and visible debris before they reach the medium, keeping the fountain loop cleaner and protecting the pump. Behind it, ion-exchange resin exchanges calcium and magnesium ions, softening hard water and lowering TDS; the coconut-shell activated carbon adsorbs residual chlorine, odours and taste-carrying compounds so the water stays palatable.
Composite construction lets one disc handle three jobs: mechanical capture, softening and dechlorination. Because the medium is matched to the housing, performance stays consistent from piece to piece, which matters when the filter carries a retail brand. The materials are produced to food-contact safety requirements, and the disc contains no BPA.
We build standard discs for common fountain sizes and custom discs to a customer's drawing. To quote accurately, send the fountain or dispenser model, the disc diameter and thickness, the retaining feature, the pump flow rate, local water hardness and TDS, the number and type of pets, and the target replacement interval. If you have a drawing or a sample, include it.
Customisation covers dimensions and structure, medium ratio (TDS reduction strength, chlorine removal, antibacterial function), logo printing and retail packaging such as colour boxes, blister packs and pouches. Our team has developed more than 1,000 filtration solutions and can propose a medium blend for your target market.
| Item | Detail |
|---|---|
| Product name | Pet water dispenser filter / smart circulating water fountain filter |
| Core materials | High-density PET non-woven fabric, high-efficiency ion-exchange resin, coconut-shell activated carbon |
| Core functions | Remove floating matter and debris, adsorb residual chlorine and odour, soften water and lower hardness |
| Applications | Automatic cat and dog fountains, smart constant-temperature pet fountains, pet water purification equipment |
| Recommended replacement | Every 2 to 4 weeks, depending on local water quality and drinking frequency |
| Safety and quality | Produced under ISO 9001/14001 and IATF 16949 systems; materials meet US EPA and NSF standards for food-contact safety |
| OEM/ODM | Custom shapes, sizes and medium ratios using the 20,000 m² clean workshop and CNAS-level laboratory |
In each case the filter sits in the fountain's recirculating loop, so matching the disc to the pump and trough geometry is the first step in selection.
Jyntrel produces these discs on multiple automated lines with monthly output in the millions of pieces, which supports repeat orders and seasonal peaks. More than 20 years of export experience to Europe, the United States, Japan and Korea gives buyers a predictable supply chain.
The 50,000 m² plant in Zhongshan, Guangdong, includes six clean workshops totalling 20,000 m², so the medium is handled in a controlled environment. Our own laboratory is CNAS-accredited and issues test reports on filtration efficiency, dust-holding capacity and resistance. The site holds IATF 16949 (2024) and ISO 9001, ISO 14001 and ISO 45001 certification, and products meet REACH and RoHS requirements with compliance documents available. Quality control runs through IQC, IPQC and OQC with batch traceability.
Tell us the fountain or dispenser model, the disc size or a drawing, the pump flow rate, your local water hardness, the number of pets, and the quantity you plan to order. With those details we can recommend a standard disc or propose a custom build and return a quotation. Contact our team to start.
This is a water filter, so air velocity does not apply. What matters is pump flow: at lower flow the water stays in contact with the resin and carbon longer, giving better TDS reduction, while higher flow favours particle capture. Share your pump flow rate and we will match the disc accordingly.
For this product we need water-side data instead: pump flow rate, the fountain's water volume, disc diameter and thickness, and local hardness and TDS. If you have a drawing or sample, include it with the model and quantity. We will then confirm a standard disc or quote a custom build.
TDS reduction depends on water hardness, flow and service time; the ion-exchange resin softens water by exchanging calcium and magnesium ions. Because the medium load and contact time both change in service, we confirm performance against your water report rather than quoting a single figure. Send your TDS and hardness values and we will advise on the medium ratio.
Yes. We support OEM/ODM on diameter, thickness, retaining structure and medium ratio, plus logo and retail packaging. Provide the fountain model or a drawing, and our team will develop a matching disc. Tooling and sample lead times are confirmed at quotation.
Yes. Samples of existing standard sizes are typically sent within 3-5 working days, and custom samples take 2-4 weeks depending on complexity. Each sample ships with technical parameters, material description and a CNAS laboratory test report. Tell us your fountain model and target market so we select the right sample.
Standard sizes usually start at 5,000-10,000 pieces; custom OEM orders generally start at 10,000 pieces depending on complexity. Standard products take about 15-25 days, and custom items including tooling about 30-45 days. Monthly capacity in the millions of pieces supports large repeat orders.
The recommended interval is every 2 to 4 weeks, depending on local water quality and how often pets drink. Hard water or multi-pet homes should change at the shorter end. We can adjust the medium blend to suit your target replacement cycle.
It is made at our 50,000 m² plant in Zhongshan, Guangdong, which includes 20,000 m² of clean workshops and a CNAS-accredited laboratory. The site holds IATF 16949 (2024) and ISO 9001, ISO 14001 and ISO 45001, and materials meet US EPA and NSF standards. REACH and RoHS compliance documents are available. Contact us with your specification to request a quotation.